Audio for In-Room Devices

Components from Ecler, Terracom & LEA Professional depending on requirements of room and audience size.

• Ecler WPaMIX-T - 2 channel micro-mixer for a stereo unbalanced signal (2 x RCA) and a microphone signal (XLR) The mic input includes a 2 band EQ (bass, TREBLE) with talk-over function to override the line signal when the microphone exceeds the talk-over detection threshold.
• ECLER WPaVOL-SR-J - a remote wall panel control for volume management and source or preset selection with front panel stereo mini-jack connector.
• Ecler WPNET4KV - an EclerNet compatible wall panel, featuring an LCD screen, a digital rotary encoder and 4 direct selection keys. Its end-user control features are volume control, source and preset selection functions.

• Ecler eSAM series (eSam402, eSAM603 and eSAM702) - featuring multiple mic/list st inputs. Including 3 band tone control section, Talkover (priority) function assignable to each mic/line input over the mix bus, stereo/mono mix switch and MUTE port for external dry contact triggering.
• Ecler DAM614 - programmable audio digital mixer. Includes 6 inputs and 4 outputs, front panel input and output level controls, DSP processing, RS-232 connectivity and infrared remote E control ports (0-10VDC). Its 4 outputs can be used as mono independent zones or coupled as stereo zones. The first 2 Inputs are stereo, and the 3rd, 4th, 5th and 6th ones are mic/line ready (phantom available), making it possible to use them independently (mono) or as stereo-coupled inputs.
• ECLER MIMO7272DN - Digital matrix including 72 audio inputs and 72 audio outputs (8 analogue inputs, 8 analogue outputs, 64 Dante™/AES67 digital inputs and 64 Dante™/AES67 digital outputs).

Components from Ecler, Terracom & LEA Professional depending on room and audience size.

• Ecler CA120, CA120HZ - 2 x 60 WRMS @ 4Ω stereo amplifier with a tiny size. 2 stereo inputs and 1 switchable stereo/mic input. Control via front panel, serial RS-232 port and IR. 0-10 VDC remote port. Auto-standby function and aux output. Available in 8Ω and Hi-Z (70-100 volt) models.
• ECLER eHSA series- High impedance amplifiers for multi-zone background music and paging systems with 70/100V line speakers. Models range from 60w to 500w output across 2 or 4 channels.
• LEA Connect series amplifiers – 2, 4 and 8 channel amplifiers designed for small to medium scale installations This IoT capable amplifier range harnesses the power of the cloud for remote control, monitoring, and notifications.

• Ecler VIC6 & VIC8- 6" (40W) or 8"(60W) in-ceiling loudspeaker with a great sound performance. Both feature + 0.5” steerable tweeter, 8Ω and 70/100V.
• Ecler IC3, IC6, IC8 & VIC8– 3”, 6" or 8" in-ceiling loudspeaker, 8Ω and 70/100V line transformer with multi-tap power connections.
• Ecler eMOTUS5PB- a 2 way, 5” and 1” tweeter, loudspeaker kit including an active and a passive cabinet. eMOTUS5PB features Bluetooth connection as well as balanced and unbalanced audio inputs along with an remote control and 0-10VDC remote port for volume control.
• Ecler eMOTUS8OD- a single 2-way, 8” woofer and 1" tweeter loudspeaker suitable for low and high impedance lines, with different power taps. Suitable for indoor and outdoor applications as its IP65-rated.

Features full duplex, input/output control, internal memory, integrated scheduler, event management, volume control, acoustic echo cancellation (AEC), noise reduction. Powered via POE and/or external power supplies.

Minimising cable pulling, installation time, installation disruption, remote set-up and maintenance.

Local or Remote Control / Management

Today, researching and purchasing products nearly always results in devices that connect either to a local network or to the cloud for control and management. This provides an opportunity to lower the total cost of ownership of the devices by simplifying the onsite installation, simplifying the device configuration and by providing the ability to remotely diagnose and maintain individual devices or entire systems.

Examples are:
LEA Professional - Connect Series amplifiers are designed from the ground up to be configured and managed across a network.
Ecler – EclerNet ecosystem of devices and software to deploy, managed and used by customers.
Terracom – A suite of Audio over IP(AoIP) products using standard SIP protocol and enabling unicast, multicast or broadcast functionality over standard network architecture.

Featuring priority management, backup management, event management, built-in scheduler, volume control, acoustic echo cancellation, noise reduction, paging, intercom, music streaming, routing, logic control, monitoring etc...

Network Protocols

SIP: Session Initiation Protocol (SIP) is a signaling protocol used for initiating, maintaining, and terminating real-time sessions that include voice, video, and messaging applications.
Ideal for merging audio, telephony and access control, transported over standard Ethernet networks as used by Terracom.
Dante: Dante is a combination of software, hardware, and network protocols that deliver uncompressed, low-latency audio over a standard Ethernet network as used by Ecler and LEA.

LG's 55VX1D - high brightness LCD displays, deliver all digital signage material clearly under the brightest lights or high ambient lighting. The 4K (UHD) DisplayPort Daisy-Chain, allows 4K (UHD) multimedia content to be shown across multiple screens without being downscaled or degraded.

BrightSign XT media player offers a high performance, no compromise, immersive 4K digital signage experience using a dedicated Signage OS - no chance of Windows messages or the blue screen of death ever being displayed. Only a single player required – no issues with syncing multiple players.

CHIEF LVS1U bracket provides the ability to level each row (micro-adjustable) by using industry standard Unistrut, to connect multiple mounts together.